 |
 |
 |
|
New Page 2
To
accommodate our customers, the CompM4 sight is now available with a low battery
compartment, and is called Aimpoint CompM4s. In all other aspects, the CompM4s
is identical to the Aimpoint CompM4.
The electronic components in the CompM4/M4s improve upon Aimpoint s existing
stateof- the-art ACET diode circuitry, allowing this new sight to run constantly
for over 8 years on a single AA battery. The CompM4 features an internal voltage
regulator that allows the sight to operate on any AA size battery available
worldwide. This sight features a 2 minute-of-angle (MOA) dot size, making it
perfectly suited for use with Aimpoint s 3XMagnifier scope module. The CompM4 is
optimized for use with all generations of night vision devices, and features an
extremely rugged and easy to use 16-position manual switch with 7 night vision
compatible settings and 9 daylight settings. The CompM4 sight body is designed
to protect both the optics and adjustment components against hard use, and is
waterproof to 45 meters (150 feet). The CompM4 also features an improved QRP2
Picatinny rail mount, eliminating the need for a separate mounting ring. This
mount has over twice the clamping force of the original QRP, and features a
lower and wider torque limiting knob to improve ease of use and lessen the
chance of the sight base becoming snagged on other equipment. The mount is keyed
into the sight to absorb recoil forces. Vertical and cantilever spacers are
available to allow the sight to fit on all M16 rifle and M4 carbine variants.
The sight can also be used on any other weapon with a Picatinny rail mounting
system.
Unique Features of the CompM4:
-
Compatible with every generation of Night Vision Device (NVD)
-
Super ACET technology allows up to 80,000 hours over 8 years
of daytime operation on one AA battery
-
1x (non-magnifying) parallax-free optic.
-
Internal voltage regulator allows the CompM4 to be used with any
AA sized battery.
-
7 night vision compatible settings and 9 daylight settings
Improved rotary switch will not suffer damage under normal use.
-
QRP2 mount has twice the clamping force of the original QRP, and
the mounting knob is wider and shorter to improve operation, and
lessen the chance of becoming snagged on other gear
-
Mount base is “keyed” into the body of the sight to absorb
recoil
-
Mount base screws directly into the sight – no separate sight
ring is required
-
500,000 hours of use on NVD setting
-
2 MOA dot for close combat and long-distance engagement
-
Matches perfectly with Aimpoint 3x Magnifier
-
Unequalled light transmission
-
Front lens opening is threaded for addition of the Killflash
anti-reflective device
-
Submersible to 150 feet (45 meters)
-
Vertical spacer included
-
Standardized as the U.S. Army’s new M68 CCO.
-
Improved adjustment caps are easier to remove, and are protected
against impact
-
Can be used with a carry handle adaptor for use on all M16-type
rifles
|
|
FREE Front, Rear Flip-Up Lens Covers & Killflash
Included w/Purchase |
|
|
|
|
|
|
|
|
|
|
